Do you have a question about the Kenwood KDC-303RG and is the answer not in the manual?
frequency range | 87.5 MHz – 108.0 MHz |
---|---|
usable sensitivity | 0.7 µV/75 Ω |
quieting sensitivity | 1.6 µV/75 Ω |
frequency response | 30 Hz – 15 kHz |
signal to noise ratio | 65 dB |
selectivity | ≥ 80 dB |
stereo separation | 35 dB |
frequency range | 531 kHz – 1611 kHz |
---|---|
usable sensitivity | 25 µV |
frequency range | 153 kHz – 281 kHz |
---|---|
usable sensitivity | 45 µV |
laser diode | GaAlAs (λ=780 nm) |
---|---|
digital filter | 8 Times Over Sampling |
D/A converter | 1 Bit |
spindle speed | 500 – 200 rpm (CLV) |
frequency response | 10 Hz – 20 kHz |
total harmonic distortion | 0.01 % |
signal to noise ratio | 96 dB |
dynamic range | 93 dB |
channel separation | 85 dB |
maximum output power | 40 W × 4 |
---|---|
output power | 26 W × 4 |
bass tone action | 100 Hz ±10 dB |
treble tone action | 10 kHz ±10 dB |
preout level / load | 1800 mV/10 kΩ |
preout impedance | ≤ 600 Ω |
operating voltage | 14.4 V (11 – 16 V allowable) |
---|---|
current consumption | 10 A |
installation size | 182 × 53 × 160 mm |
weight | 3.1 Lbs (1.4 kg) |