Kenwood KX-97CW User Manual

STEREO CASSETTE TAPE DECK
KX-97CW |
INSTRUCTION MANUAL
KENWOOD
88/12 1110967664521
© PRINTED IN JAPAN B50-8955.00 (K.P U.MLUE,
LAY
Introduction
Your choice of this product indicates that you are a de-
votee to excellence in sounc reproduction
We appreciate your patronage and take pride in the jong
tradition of quality components
So that you can get the most out of your unit, we sug-
gest that you take the time to read through this manual
before you hook up and operate your system. This will
acquaint you with operating features, and system-con-
nection considerations, so that your listening pleasure
will be enhanced right from the start. You will notice that
in all aspects of planning, engineering, styling, operating
convenience and adaptability, we have sought to anticip-
ate your needs and desires
Keep this manual handy for future reference.
For your records
Record the serial number, found on the back of the unit,
in the spaces designated on the warranty card, and in
the space provided below. Refer to the model and serial
numbers whenever you call upon your dealer for infor-
mation or service on this product
Model Kx-97CW Serial Number
Unpacking
Unpack the unit carefully and make sure that all acces-
sories and cables are put aside so they will not be lost.
Examine the unit for any possibility of shipping damage
lf your unit is damaged or fails to operate, notify your
dealer immediately. !f your unit was shipped to you di-
rectly, notify the shipping company without delay. Only
the consignee ithe person or company receiving the unit}
can file a claim against the carrier for shipping damage
We recommend that you retain the original carton and
packing materials for use should you transport or ship
the unit in the future
WARNING NOTICE:
IN MOST CASES IT IS AN INFRINGEMENT OF COPY-
RIGHT TO MAKE COPIES OF TAPES OR DISCS WITH-
OUT THE PERMISSION OF THE COPYRIGHT
OWNERS. ANYONE WISHING TO COPY COMMER-
CIALLY AVAILABLE TAPES OR DISCS SHOULD CON-
TACT THE MECHANICAL COPYRIGHT PROTECTION
SOCIETY LIMITED OR THE PERFORMING RIGHT SO-
CIETY LIMITED.
DOLBY and the double-D symbol are trademarks of Dol-
by Laboratories Licensing Corporation
Noise reduction circuit made under license from Dolby
Laboratories Licensing Corporation
Accessories
RCA pin-piug cord
System control cord
(Except for some areas.)
Contents
Tape playback ©... 2. ee ee ee 8
Caution:
Read
the
following
pages
marked
/\
carefully
to
keep
your
safety.
Z\Before applying power... 6... ee 2 Tape recording... .......-.....20.0000- 10
ASSafety precautions .. 000.200 0-000 008 ee 2 Timer stand by operation... ...........-. 12
ZASimportant safeguards... 1... ee 3 Maintenance ............-.....-..--. 12
System connections ......... 5 In case of difficulty... 22... 20.00 .20000. 13
Controls, indicators and connectors ....-...- 6 Specifications .. 0.0.0... 00.0000. 0 cee 14

Kenwood KX-97CW Specifications

Audio Specifications

tape speed	4.76 cm/sec
frequency response (normal tape)	20 Hz to 15, 000 Hz
frequency response (CrO2 tape)	20 Hz to 16, 000 Hz
frequency response (metal tape)	20 Hz to 16, 000 Hz

Power and Electrical Specifications

power consumption	30 W
signal-to-noise ratio (Dolby C)	72 dB
signal-to-noise ratio (Dolby B)	65 dB

Weight and Dimensions

weight	5.4 kg
width	420 mm
height	119 mm
depth	266 mm