Do you have a question about the Kenwood R-SG7 and is the answer not in the manual?
rated power output | 20 watts per channel |
---|---|
total harmonic distortion | 0.02% (1 kHz, 10 W, 6 Ω) |
frequency response | 20 Hz ~ 40 kHz, +0 dB, -3 dB |
tuning frequency range | 87.5 MHz ~ 108 MHz |
---|---|
usable sensitivity | 1.2 µV (75 Ω) / 13.2 dBf (40 kHz DEV., S/N 26 dB) |
signal to noise ratio MONO | 65 dB |
tuning frequency range | 531 kHz ~ 1, 602 kHz |
---|---|
usable sensitivity | 15 µV / (500 µV/m) |
signal to noise ratio | 48 dB |
power consumption | 45 W |
---|---|
dimensions | W: 200 mm H: 77 mm D: 278 mm |
weight | 3.0 kg |
frequency response | 4 Hz ~ 20 kHz, ±1.0 dB |
---|---|
signal to noise ratio | More than 100 dB |
total harmonic distortion | Less than 0.004 % (at 1 kHz) |
power consumption | 10 W |
---|---|
dimensions | W: 200 mm H: 77 mm D: 249 mm |
weight | 2.0 kg |
wow and flutter | 0.1 % (W.R.M.S.) |
---|---|
frequency response TYPE I tape | 40 Hz to 18, 000 Hz, ±3 dB |
signal to noise ratio Dolby B NR ON | 67 dB (CrO2 tape) |
power consumption | 14 W |
---|---|
dimensions | W: 200 mm H: 77 mm D: 249 mm |
weight | 2.2 kg |