Need help?Do you have a question about the Kenwood TK-6110 and is the answer not in the manual?
General| frequency range type 1 | 29.7-37.0 MHz |
|---|---|
| frequency range type 2 | 35.0-50.0 MHz |
| number of channels | 32 |
| channel spacing | 20 kHz / 25 kHz |
| channel step | 5 kHz |
Power| operating voltage | 13.6 V DC ±15% |
|---|---|
| current drain standby | < 0.6 A |
| current drain receive | < 2.4 A |
| current drain transmit | < 15 A |
| duty cycle transmit | 20% |
Operating Environment| operating temperature range | -22˚f ~ +140˚f (-30˚c ~ +60˚c) |
|---|---|
| frequency stability | ±0.0005% |
| antenna impedance | 50 Ω |
Receiver| sensitivity (12dB SINAD) | 0.25µV |
|---|---|
| selectivity | 75 dB |
| intermodulation distortion | 70 dB |
| spurious response | 70 dB |
| audio output | 10W at less than 5% distortion |
Transmitter| RF output power | 70 W |
|---|---|
| type of emission | 16K0F3E |
| spurious response | 62 dB |
| FM hum & noise | 50 dB |
| microphone impedance | 600 Ω |
Weight and Dimensions| dimensions (W x H x D) | 6-1/4 x 2 x 6-1/4 in. (160 x 50 x 160 mm) |
|---|---|
| weight (net) | 3.5 lbs. (1.6kg) |
To Next Page
