Kenwood TM-241A User Manual

From The N3UJJ.COM Document LibraryFrom The N3UJJ.COM Document Library
5-10 PAGING
The paging function is available when the optional
DTMIF unit (DTU-2) is installed.
The
paging function is useful to call all stasions a group,
a
sp13cific station, or wait for a call from another station
by using DTMF(Duai Tone Multi Frequency signaling.
Example: When station 2 is called
F: 145.66DMHz
~~~MHz
333 Ill
, L<:.L_--l=..=:...L... __ ..L...u...L. Sta liOn 2's
,} code
~~~
F: 145.660MHz
lnd1v1dual code : 222
Stat1un I
F: 145.66DMHz
lnd1v1dual code : 333
Stat1on 2
Your code
'\l
~?
F: 145.660MHz
lnd1v1dual code : 444
Stat1on 3
The common group code and individual codes should
be determined in advance. These codes should be from
000 to 999 (3 digits). Unlike DTSS, the code of the calling
station
is displayed on the receiver, so the receiver can
identify the calling station.
When called by a local station, the individual code
of
the calling station is displayed. When called with a
group code, that group code is displayed.
Paging operation procedure
Set
your station code
Tune
to frequency of the other station
I
I
Enter the paging mode
J
•
To call the other To stand by for a
station pager
Set the code
of
station to be called
Transmit
Call Stand by
41

Kenwood TM-241A Specifications

General

Brand	Kenwood
Model	TM-241A
Category	Transceiver
Language	English