Kenwood TS-990S Configuring Guide

This guide is specifically aimed at the user of the Kenwood TS-990S transceiver, but the steps are very
similar to those needed for the TS-590SG and TS590S, as well as other transceivers with USB sound and
CAT interfaces built in.
This guide is the work of Mitchel Baum – AE2A, and may be reproduced and distributed only in it’s
entirety.
Configuring the TS-990S for Fldigi
Without Using an outboard Interface

Kenwood TS-990S Specifications

General

Receiver Type	Triple Conversion Superheterodyne
Antenna Tuner	Built-in automatic antenna tuner
DSP	Yes
IF DSP	Yes
Modes	SSB, CW, AM, FM
Display	7-inch TFT color LCD
Weight	25 kg (55.1 lbs)
Antenna Connectors	SO-239
Power Supply	13.8V DC