GB
KERN 440
Version 3.4 01/2006
Operating Instructions
Precision balance
Tabel of contents:
1 Technical data_________________________________________________ 30
2 Declaration of conformity _______________________________________ 34
3 Fundamental information (general)________________________________ 35
3.1 Intended use ____________________________________________________ 35
3.2 Inappropriate use ________________________________________________ 35
3.3 Guarantee ______________________________________________________ 35
3.4 Monitoring the test substances_____________________________________ 36
4 Fundamental safety information __________________________________ 36
4.1 Observe the information in the operating instructions__________________ 36
4.2 Staff training ____________________________________________________ 36
5 Transport and storage __________________________________________ 36
5.1 Acceptance check _______________________________________________ 36
5.2 Packaging ______________________________________________________ 36
6 Unpacking, installation and commissioning ________________________ 37
6.1 Place of installation, place of use___________________________________ 37
6.2 Unpacking ______________________________________________________ 37
6.2.1 Installation __________________________________________________________ 37
6.2.2 List of items supplied __________________________________________________ 38
6.3 Mains supply____________________________________________________ 38
6.4 Battery Operation ________________________________________________ 38
6.5 Connecting peripheral equipment __________________________________ 39
6.6 Initial start-up ___________________________________________________ 39
6.7 Adjustment _____________________________________________________ 39
6.8 Adjusting_______________________________________________________ 39
6.9 Underfloor weighing______________________________________________ 40
To Next Page
Need help?
General
