Keurig Vue Use & Care Guide

Please Add
Water
SECTION 3
Using Your Brewer
Adding Water
When the water supply is low, the Touchscreen will display
as pictured and the Water Reservoir light will flash.
Bottled or filtered water is recommended.
When brewing at sizes larger than 12 oz., if the Brewer senses the
water level is low, the brewing process will stop until the Water
Reservoir is refilled. Once enough water has been added, the
brewing process will resume.
Do not remove the Water Reservoir during the brewing process.
There are three options for filling the Water Reservoir:
Option 3
You may also remove the Water Reservoir from
the Brewer to fill it. Replace the Lid and return
the filled Water Reservoir to the Brewer.
Do not remove the Water Reservoir during the brewing process.
Please Add
Water
Option 1
Remove the Water Reservoir Lid and pour water directly
into the Water Reservoir. Replace the Lid.
Option 2
Instead of removing the Water Reservoir Lid, you can
lift the Flip Top. Pour water into the Water Reservoir.
Lower the Flip Top.
16
KER484_UserGuide.indd 16 9/16/11 9:35 AM

Keurig Vue Specifications

General

Brand	Keurig
Model	Vue
Category	Coffee Maker
Language	English