Features
Hemispherical Polymineral Cone with a larger Inverted Structural
Dome™ (ISD) means high rigidity under pressure for accurate linear control, low
enclosure pressure loss to reduce "pump-down", high internal damping, and
excellent sunlight, pollution and moisture resistance.
Double-Stitched Pleated Surround prevents cone/surround separation at
high excursions.
Blackened Extended Pole Piece allows cooler operation for superior power
handling and magnetic field linearity around voice coil gap for enhanced control.
Vented Pole Piece relieves low bass-robbing pressure under the center
dome.
Extended Backplate prevents damaging voice coil "bottoming".
Perimeter Venting for measurably lower operating temperature and freer
cone motion.
Hi-Temp Kapton® Voice Coil Former protects against warped, rubbing
voice coils.
Long-Throw Voice Coil for enormous cone excursion capabilities.
High Power Sleeved Tinsel Leads resist breakage and reduce power rob-
bing resistance losses.
C8/C10/C12/C15
Congratulations! You have just purchased one of the most flexible subwoofers yet
from KICKER. Your Comp sub is designed to give you great bass performance in a wide
variety of applications. These installations instructions will help you get the most out of
your new KICKER sub. Thanks for buying KICKER. Enjoy!
To Next Page
Need help?
General