R-2650-W
The affordable R-2650-W in-wall
loudspeaker makes discrete audio a
convincing reality for almost anyone. Built to
the same exacting standards as all Klipsch
products, this high-performance model
doesn
’t suffer from the design shortcuts and
sonic compromises that plague competing
designs.
This exceptional speaker employs a 6.5-inch
gray polymer woofer cone and 1-inch
soft/silk dome tweeter to deliver mind-
bending depth and clarity.
Available in a white finish, the R-2650-W can
be paired with one of Klipsch’s new
installation kits (sold separately). Each of
these revolutionary kit designs allow for
increased mounting flexibility and
incorporate a mud ring, wire tie and
universal metal mesh wing for multi-position
placement and a color-coded bracket for
easy speaker size identification.
6.5" Two-Way In-Wall Loudspeaker
SPECIFICATIONS
FREQUENCY RESPONSE 65Hz-20kHz ± 3dB
SENSITIVITY 91dB @ 1 watt/1 meter
NOMINAL IMPEDANCE 8 ohms
CROSSOVER FREQUENCY 1800Hz
POWER HANDLING 50 watts (200 watts peak)
ENCLOSURE MATERIAL/TYPE ABS/ Infinite baffle, front flush with wall
DRIVE COMPONENTS Two-way system using one 1" (2.54cm)
silk dome tweeter and one 6.5" (16.51cm)
polymer woofer
WIRE GAUGE ACCOMMODATED 12
WEIGHT 7.2 lbs. (3.25kg)
HEIGHT
1
4.3" (36.32cm)
WID
TH
9.3" (23.62cm)
MOUNTIN
G DEPTH
3.75" (9.5cm)
CUT
OUT DIMENSIONS
13" (33.02cm) x 8" (20.32cm)
FINISH
Whit
e
INS
T
ALLATION KIT IK-650-W (sold separately)
■
Good sensitivity and power handling
■
Single piece grille frame and rustproof aluminum grille
■
IR receiver knock out
■
Weatherized components
www
.klipsch.com
1-800-KLIPSCH
All specifications are subject to change without notice. ©2004
Need help?
General
