KMART anko MY-CS6002WP1 User Manual

11
4. Place the inner pot inside the cooker housing
Before that, be sure to remove foreign objects and wipe dry the outside of the
inner pot and the heating element inside of the cooker.
After putting the inner pot inside the housing, rotate the inner pot slightly to
ensure good contact between the inner pot and the heating element.
Hold the lid handle and put the lid on the cooker, with the" "
mark on the lid and " " mark on the housing rim are aligned.
Rotate the lid counterclockwise approximately 30 degrees
until the " " mark on the lid is a aligned with the " " mark
on the housing rim.
5. Close the lid completely
6. Attach the power cord to the appliance then plug into socket outlet. An
audible sound and "--" show on display, indicating the cooker is in standby
mode now.
7. For any functions except "Keep-Warm" on "Saute", close the exhaust valve
by turning the valve handle to the right, pointing away from the steam
symbol.
Please note that it is normal and necessary for the steam exhaust valve to
be loose.
Note: When the cooker is plugged in while you open or close the lid, an
audible sound will indicate correct locking and unlocking
Exhaust valve
open/steam position.
Exhaust valve
closed position.

KMART anko MY-CS6002WP1 Specifications

General

Brand	KMART
Model	anko MY-CS6002WP1
Category	Electric Pressure Cooker
Language	English