10
ASSEMBLY INSTRUCTIONS
To Remove Battery Pack
a. Make sure that the switch is in the OFF position.
b. Hold the battery pack in the palm of your hand.
c. Press the battery-release button with your thumb. The battery pack will disengage from the
latch.
d. Grasp the battery pack and remove it from the power head.
WARNING:
• Always be aware for the location of your feet, children, or pets when pressing the
battery-release button. NEVER remove the battery pack at a high position. Serious
injury could result if the battery pack falls.
• Battery tools are always in operating condition. Therefore, the ON/OFF switch should always
in OFF position when the tool is not in use or when carrying the tool at your side.
To Next Page
Loading...
Need help?
General
