Luma 75 Pocket Portable Projector Support
Getting Started
1. Charge the Projector
• Connect the adapter to the micro USB port of the projector, using the included power
cord.
• Plug the adapter into an outlet or other power source.
• You may now use the projector .
• While plugged in, the projector's battery will automatically charge.
It is recommended that you allow the projector to charge for at least 4 hours before using it in
battery mode for the first time.
2. Turn on the Projector
Press and hold the power button for 5 seconds to turn on the projector.
3. Adjust Screen Size
The screen size will increase or decrease as the projector is brought closer or further from the
wall.
4. Adjust the Focus Wheel
Open a still image and carefully rotate the focus wheel until the image is clear.
To Next Page
Need help?
General