Kohler 5024-T-0 User Manual

2. Install the Urinal
Install the hangers according to the roughing-in illustration.
NOTE: Wall hangers must be installed to a secure surface as shown
in hanger screw location.
Mark the anchor hole locations on the wall according to the
roughing-in illustration. Make sure the holes are level.
Drill pilot holes in the center of each hole mark.
Thread a nut onto the hanger screws, and install the coarse-threaded
end of the hanger screws into the pilot holes. Use an adjustable
wrench to turn the hanger screws into the support framing so the
coarse threads are fully engaged.
CAUTION: Risk of personal injury or product damage. Handle
with care. Vitreous china can break or chip if the product is
handled carelessly.
Carefully position the urinal over the hanger screws and onto the
wall hanger.
CAUTION: Risk of product damage. Do not overtighten the
screws.
Secure the urinal with the washers and nuts.
1002334-2-B 4 Kohler Co.

Kohler 5024-T-0 Specifications

General

Brand	Kohler
Model	5024-T-0
Category	Plumbing Product
Language	English