1458701-14-B©2021 Kohler Co.
Outlet Selection
Select outlets: Press the desired outlet icon.
Edit outlets: Use the KOHLER Konnect app.
Zones
Press to view the current temperature.
Increase: Turn the dial clockwise.
Decrease: Turn the dial counterclockwise.
Press to link or unlink zones.
Settings
Two-Zone Shower Screen
User Preset
Press to access presets and experiences.
Custom Preset: With the shower running,
select "Add Preset" to save the current
shower settings.
Stop Preset: Press the control button.
Digital Shower
Control Button/Dial
Start/stop shower: Press the button.
Home
Press to access the home screen.
Home Screen Shower Screen
Navigate menus: Turn the dial.
Firmware Versions: View system information.
Screen Brightness: Adjust brightness.
Edit Setup: Set preferences
Flow Control: Enable/disable flow control.
See homeowners guide for:
Factory Reset, Locked Modes, Add to App,
and Remove From App
NOTE: Must be enabled in Settings.
Turn the dial to adjust the
temperature.
Turn the dial to adjust the flow rate.
Linked Zones: Turn the dial to
adjust the temperature or flow rate
for both zones.
Unlinked Zones: Press the top or
bottom zone. Then turn the dial to
adjust the temperature or flow rate
for that zone.
Linked
Unlinked Re-linked
Flow Control
(Volume)
Press to view the current flow rate
(limited in regions that require flow
restrictors).
Temperature
˚1
˚01
5
00
˚105
To Next Page
Need help?
General
