INSTALLATION INSTRUCTIONS
TT-1469 6
07
Original Issue Date: 6/07
Model:
MPAC t 1500
Market: ATS
Subject:
MPAC t 1500 Demonstration Case Kit GM51765-KP1
Introduction
The demonstration case kit allows the user to show the
MPACt 1500 automatic transfer switch controller setup
and operation. The demonstration kit also simulates
normal source failure and return. The kit can be plugged
into a 120 VAC outlet and operated on a table top.
The kit includes the demonstration unit, power cord,
Transfer Switch Operation/Installation Manual
TP-6446, Monitor III software with key, and Monitor III
Operation Manual TP-6347.
The demonstration unit is shown in Figure 1.
1
1. MPACt 1500 user interface
2. Ethernet connector for PC
3. USB port for saving/loading
files
4. I/O module connector
5. Normal source available/failure
switch
6. Power switch
7. Power cord connection
2 3 4 5 6 7
Figure 1 Demonstration Unit
To Next Page
Need help?
General
