Kohler TAHOE User Manual

114409-2-CB
Kohler Co., Kohler WI3
 marble or solid surface countertops upside down on
foam padding. Drill 3/8” diameter holes, 5/8” deep in the
locations shown. Set the lead anchors into the holes using
a setting tool. Tap the setting tool with a hammer to set the
lead anchors into position.
NOTE: The insert must be properly installed to ensure
proper fit.
NOTE: For wood countertops, pre-drill the holes for wood
screws in the locations shown. Waterproof any
unprotected areas of wood.
          
        
      
       
            
        
 
SEALANT
3/8” D.
5/8”
LAVATORY
MARBLE SLAB
INSTALLATION
WOOD COUNTER
INSTALLATION
LAVATORY
SEALANT
Fig. #5
Follow the instructions listed on the sealant label. Allow
the sealant to set for 30 minutes or longer. Connect the
drain fittings and faucet supply fittings. Turn on the water,
and check for leaks at all the connections.
Fig. #6
PARTS INFORMATION
ITEM PART
NO. NO. DESCRIPTION
1 44596 Insert
2 44597 Clip
3 68918 Screw
4 44598 Screw
4
3
2
1
2

Kohler TAHOE Specifications

General

Brand	Kohler
Model	TAHOE
Category	Plumbing Product
Language	English