OPTIONAL EQUIPMENT
STANDARD EQUIPMENT FOR BASE MACHINE
CRAWLER DOZER
Photo may include optional equipment.
www.Komatsu.com Printed in Japan 200706 IP.AD (10)
CEN00250-00
Materials and specifications are subject to change without notice.
is a trademark of Komatsu Ltd. Japan.
HORSEPOWER
Gross: 130 kW
175 HP @ 1850 rpm
Net: 116 kW 155 HP @ 1850 rpm
OPERATING WEIGHT
16650 kg
36,710 lb
D
68ESS
D68ESS-12
● Air cleaner, double element with
dust indicator
● Alternator, 35 ampere/24V
● Batteries, 112 Ah/2 x 12V
● Blower cooling fan
● Decelerator pedal
● Engine hood
● Engine side covers, gull-wing
● Fenders
● Lighting system, (includes 2 front, 1 rear)
● Locks, filler caps and covers
● Mono-lever steering
● Muffler with curved exhaust pipe
● Radiator guard door, flat
● Radiator reserve tank
● Rear cover
● ROPS mounting brackets
● Starting motor, 7.5 kW/24V
● Seat, adjustable
● Tr ack roller guard, end sections
● Tr ack shoe assembly
—Heavy-Duty sealed and lubricated track
● 560 mm 22" single grouser shoe
● Underguards, oil pan and transmission
● Wet, multiple-disc steering clutch/blake
● AR track assembly
(abrasion resistant bushings)
● Backup alarm
● Electronic instrument monitor panel
● Front pull hook
● Hitch type drawbar
● High mount foot rests
● Pressure check ports for power train
● Radiator core protective grid
● Rigid type drawbar
● Underguard, heavy-duty
● 7 track roller
SHOES
Shoe Additional weight
Ground contact
area
610 mm 24.0"
+110 kg 32635 cm
2
single-grouser
+240 lb 5,058 in
2
shoe
ROPS CANOPY (without cab)
● Additional weight 340 kg 750 lb
● Meets ISO 3471 SAE J/ISO3471 ROPS
standards, and ISO 3449 FOPS
standard.
● Roof dimensions:
—Length: 1830 mm 6'0"
—Width: 1600 mm 5'3"
—Height from operator compartment
floor: 1705 mm 5'7"
MULTI-SHANK RIPPER
● Additional weight (including hydraulic
control unit): 1645 kg 3,630 lb
● Beam length: 2170 mm 7'1"
●
Maximum digging depth: 665 mm 2'2"
●
Maximum lift above ground: 565 mm 1'10"
STEEL CAB
● Additional weight 285 kg 630 lb
● All-weather, enclosed pressurized cab
● Dimensions:
—Length: 1765 mm 5'9"
—Width: 1720 mm 5'8"
—Height: 1625 mm 5'4"
—Height from floor to ceiling:
1515 mm 5'0"
ROPS CANOPY FOR CAB
● Additional weight 250 kg 550 lb
● Meets ISO 3471, SAE J/ISO 3471 ROPS
standards, and ISO 3449 FOPS
standard.
● Roof dimensions:
—Length: 1270 mm 4'2"
—Width: 1490 mm 4'11"
—Height from operator compartment
floor: 1705 mm 5'7"
To Next Page
Need help?
General
