.
OPERATION
OPERATION
OPERATION
OPERATION
3. Operate blade control lever (3) and ripper control lever (4) to
the RAISE position, raise the blade 40 - 50 cm (15.8 - 19.7 in)
from the ground, and raise the ripper to the maximum height.
4.
Turn fuel control dial (5) to the full speed (MAX) position, raise
the engine speed, and fully depress decelerator pedal (6).
5.
Move joystick to the F (FORWARD) or R (REVERSE) position,
gradually release decelerator pedal (6) and allow the machine
to move.
REMARK
Check that the backup alarm sounds when steering, forward-reverse, gear shift lever is placed in REVERSE
position. If the alarm does not sound, please contact your Komatsu distributor.
3 - 105
To Next Page
Loading...
Need help?
General
