OPTIONAL EQUIPMENT
● Additional filter system for poor-quality fuel
● Air conditioner with defroster
● Alternator, 60 Ampere, 24 V
● Arms
—2925 mm 9'7" arm assembly
—2410 mm 7'11" arm assembly
—1840 mm 6'0" arm assembly
● Batteries, large capacity
● Bolt-on top guard, [Operator Protective
Guards level 2]
● Boom, 5700 mm 18'8"
● Cab accessories
—Rain visor
—Sun visor
● Cab front guard
—Full height guard
—Half height guard
● Heater with defroster
● Long lubricating intervals for work equip-
ment bushing (500 hours)
● Rear view monitoring system
● Seat belt, retractable
● Seat, suspension
● Service valve
● Shoes, triple grouser
—PC200-8: 500 mm 20",
700 mm 28", 800 mm 31.5"
—PC200LC-8: 600 mm 24",
800 mm 31.5", 900 mm 35.5"
● Track frame undercover
● Track roller guards (full length)
● Working lights
—2 on cab
—1 on counterweight
STANDARD EQUIPMENT
● Alternator, 35 Ampere, 24 V
● Anti-slip plates
● Auto-decel
● Automatic engine warm-up system
● Batteries, 110 Ah/2 x 12 V
● Boom holding valve
● Cab, OPG top guard level 2 capable with
optional bolt-on top guard
● Counterweight
● Dry type air cleaner, double element
● Electric horn
● EMMS monitoring system
● Engine, Komatsu SAA6D107E-1
● Engine overheat prevention system
● Fan guard structure
● Hydraulic track adjusters (each side)
● Multi-function color monitor
● Power maximizing system
● PPC hydraulic control system
● Radiator and oil cooler dust proof net
● Rear reflector
● Rearview mirrors (RH, LH, rear, sidewise)
● Starting motor, 4.5 kW/24 V x 1
● Suction fan
● Track guiding guard, center section
● Track roller
—PC200-8, 7 each side
—PC200LC-8, 9 each side
● Track shoe
—PC200-8, 600 mm 24" triple grouser
—PC200LC-8, 700 mm 28" triple grouser
● Travel alarm
● Working light, 2 (boom and RH)
● Working mode selection system
SPECIAL PURPOSE BUCKET
• Ditch cleaning bucket
—Capacity
SAE heaped 0.80 m
3
1.05 yd
3
CECE heaped 0.70 m
3
0.92 yd
3
Width 1800 mm 70.9"
• Trapezoidal bucket is ideal for digging
ditches and for drainage works
—Capacity
SAE heaped 0.7 m
3
0.92 yd
3
CECE heaped 0.5 m
3
0.65 yd
3
• Slope finishing bucket for scraping
slopes of banks
—Capacity
SAE heaped 0.40 m
3
0.52 yd
3
CECE heaped 0.35 m
3
0.46 yd
3
Width 2000 mm 78.7"
• Ripper bucket for hard and rock ground
—Capacity
SAE heaped 0.62 m
3
0.81 yd
3
CECE heaped 0.56 m
3
0.73 yd
3
Width 990 mm 39.0"
• Single-shank ripper and three-shank
ripper are recommended for rock-digging
and crushing, hard soil digging, pave-
ment removal works, etc.
www.Komatsu.com
CEN00049-06 Materials and specifications are subject to change without notice.
is a trademark of Komatsu Ltd. Japan.
Printed in Japan 200905 IP.As(10)
FLYWHEEL HORSEPOWER
Gross: 116 kW 155 HP @ 2000 rpm
Net: 110 kW 148 HP @ 2000 rpm
OPERATING WEIGHT
PC200-8: 19400– 20010 kg
42,770– 44,110 lb
PC200LC-8: 20630– 21460 kg
45,480– 47,310 lb
Photo may include optional equipment.
PC200-8
PC200LC-8
PC
200
HYDRAULIC EXCAVATOR
To Next Page
Need help?
General
