HORSEPOWER
Gross: 149 kW 149 HP @ 2050 rpm
Net: 140 kW 187 HP @ 2050 rpm
OPERATING WEIGHT
PC270-8: 27140 – 28050 kg
59,830 – 61,840 lb
PC270LC-8: 28040 – 29020 kg
61,820 – 63,980 lb
BUCKET CAPACITY
1.14 – 1.26 m
3
1.49 – 1.65 yd
3
WALK-AROUND
H YDRAULIC E XCAVATOR
HYDRAULIC EXCAVATOR
PC270-8
PC270-8 0
32
Large TFT LCD
monitor
• Easy-to-see and use 7"
large multi-function color
monitor
• Can be displayed in 12
languages for global
support.
TFT : Thin Film Transistor
LCD : Liquid Crystal Display
See page 8.
Large Comfortable Cab
• Low-noise cab, similar to passenger car
• Low vibration with cab damper mounting
• Highly pressurized cab with optional air conditioner
• Operator seat and console with armrest that enables operations in
the appropriate operational posture
See page 6.
Ecology and Economy Features
● Low fuel consumption by total
control of the engine,
hydraulic and electronic system.
Reduces fuel consumption by approx. 10%.
(Compared with the PC270-7)
● Low emission engine
A powerful, turbocharged and air-to-air
aftercooled Komatsu SAA6D107E-1 provides
140 kW 187 HP. This engine meets EPA Tier 3
and EU Stage 3A emission regulations, with-
out sacrificing power or machine productivity.
• Economy mode improves fuel consumption.
• Eco-gauge for energy-saving operations
• Extended idling caution for fuel conservation
● Low operation noise
The dynamic noise is lowered by 1 dB compared
with the PC270-7, realizing a low noise operation.
● Large Drawbar Pull
Provides superb steering and slope climbing
performance.
See pages 4 and 5.
Easy Maintenance
• Long replacement interval of engine oil, engine oil filter, and
hydraulic filter
• Remote mounted engine oil filter and fuel drain valve for easy
access
• Equipped with the fuel pre-filter as standard (with water separator)
• Side-by-side cooling concept enables individual cooling modules
to be serviced.
• Equipped with the EMMS monitoring system
See page 9.
Photo may include optional equipment.
Safety Design
• Cab dedicated to hydraulic excavator for protecting the
operator in the event of a roll over accident.
• Anti-slip plates for safe work on machine
• Safety enhancement with large side-view, sidewise, and
rear mirrors added.
• Rear view monitoring system for easy checking behind the
machine (optional)
• OPG top guard level 2 capable with optional bolt-on top guard
See page 7.
To Next Page
Loading...
Need help?
General
