SPECIAL PURPOSE BUCKET
OPTIONAL EQUIPMENT
STANDARD EQUIPMENT
www.Komatsu.com
CEN00223-01 Materials and specifications are subject to change without notice.
is a trademark of Komatsu Ltd. Japan.
Printed in Japan 200804 IP.As(10)
• Alternator, 50 Ampere, 24V
• Anti-slip plates
• Auto-decel
• Automatic engine warm-up system
• Batteries, 110 Ah/2 x 12V
• Boom holding valve
• Cab, capable OPG (OPG) with optional
bolt-on top guard
• Corrosion resistor
• Counterweight, 9220kg 20,330lb
• Dry type air cleaner, double element
• Electric horn
• Engine, Komatsu SAA6D125E-5
• Engine overheat prevention system
• Fan guard structure
• Fuel pre-filter (with water separator)
• Hydraulic track adjusters (each side)
• Multi-function color monitor
• Power maximizing system
• PPC hydraulic control system
• Radiator & oil cooler dust proof net
• Rear reflector
• Rear view mirror (RH, LH)
• Seat belt, retractable
• Track guiding guard, center section
• Track roller
—PC400-8, 7 each side
—PC400LC-8, 8 each side
• Track shoe
—PC400-8, 600 mm 24" triple grouser
—
PC400LC-8, 700 mm 28" triple grouser
• Travel alarm
• Two settings for boom
• Working light, 2 (boom and RH)
• Working mode selection system
• Air conditioner with defroster,
hot & cool box
• Alternator, 60 ampere, 24 V
• Arms
—2400 mm 7'10" arm assembly
—2900 mm 9'6" arm assembly
—3380 mm 11'1" arm assembly
—4000 mm 13'1" arm assembly
—4800 mm 15'9" arm assembly
• Batteries, 140 Ah/2 x 12 V
• Bolt-on top guard, (Operator Protective
Guards level 2 (OPG))
• Boom, 7060 mm 23'2"
• Cab accessories
—Rain visor
—Sun visor
• Cab front guard
—Full height guard
—Half height guard
• Heater with defroster
• Long lubricating intervals for implement
bushings
• Rear view mirror (rear and sidewise)
• Rear view monitoring system
• Seat, suspension
• Seat, suspension with heater
• Service valve
• Shoes, triple grouser shoes
—PC400-8
700 mm 28", 800 mm 31.5"
—PC400LC-8
600 mm 24", 800 mm 31.5"
• Track roller guards (full length)
• Track frame undercover
• Variable track gauge
• Working lights (2 on cab)
• Ripper bucket for hard and rock ground
—Capacity
SAE heaped 1.1 m
3
1.44 yd
3
CECE heaped 1.0 m
3
1.31 yd
3
Width 1250 mm 49.2"
• Single-shank ripper is recommended for
rock-digging and crushing, hard soil
digging, pavement removal works, etc.
Photo may include optional equipment.
PC400-8
PC400LC-8
PC
400
FLYWHEEL HORSEPOWER
Gross: 270 kW 362 HP @ 1900 rpm
Net: 257 kW 345 HP @ 1900 rpm
OPERATING WEIGHT
PC400-8: 41740– 42590 kg
92,020– 93,890 lb
PC400LC-8: 42290– 43200 kg
93,230– 95,240 lb
HYDRAULIC EXCAVATOR
To Next Page
Need help?
General
