E-1
INSTALLATION MANUAL
//
A02E-9951-00
<Important>
Be sure to correctly follow the procedures in order as explained in this installation manual.
If you do not follow the procedure in order, the image trouble may occur.
I. Outline of installation procedures
When installing the machine and associated options as a system, follow the order shown on the upper.
Note:
• For the detailed installation procedures for each option, follow the instructions given in the corresponding
installation manual and perform the procedures correctly.
• When placing the machine on the floor, make sure to use the paper feed cabinet or the desk to secure
the performance and the quality of the product.
• Once the Power Switch is turned ON, do not turn OFF it until the installation work has been completed.
• Lifting the machine in an awkward position or transporting it in a poorly balanced position could result in
personal injury. When transporting the machine, assign an adequate number of persons to the job and
ensure that each person can take a good position of not being excessively loaded.
(mass: approx. 99 kg (218-1/4 lb))
DF-611
✱ Electron system options
PC-104
PC-204 DK-504PC-405
Electron system options
OC-507SP-501
AU-101
AU-201
WT-502 Machine
EK-603*
FK-502*
SA-501*
ML-501 FK-502
SC-503*
MK-711
FS-519
MT-502 SD-505
PK-515
OT-602
JS-505
MK-713
* : No particular order in installation procedures.
A02EIXC006DA
Applied Machines: / /
To Next Page
Need help?
General
