Normal use means use under normal conditions as described in this manual i.e. use inks recommended by
Korthofah BV and use only original spare parts.
The printer may not be used in areas which have a fire or explosion hazard.
Korthofah BV does not accept any liability for damage to the equipment or personal injury resulting from
improper use of the equipment or improper maintenance. Neither does Korthofah BV accept any liability for
the normal wear-and-tear of the equipment.
1.4 Specifications
Only general specifications are described in this section. Refer to Appendix A for more detailed
specifications.
1.4.1 Coding unit
Fig. 1.1 Coding units, global dimensions
A general impression of the coding unit dimensions is given in Fig. 1.1. The dimensions (H x W x D, in mm)
(bracket included) and the typical specifications of coding units are:
The ambient temperature must be between 5 °C and 40 °C, with a relative humidity between 10% and 90%
(non-condensing).
Use only Kortho GJ inks and cleaners for this printer. Make sure the ink and cleaner used match.
To Next Page
Loading...
Need help?
General
