Kramer 900XL User Manual

900XL Quick Start
P/N:
2900- 30128 1 QS
Rev:
7
Scan for full manual
900XL Quick Start Guide
This guide helps you install and use your 900XL for the first time.
Go to www.kramerav.com/downloads/900XL to download the latest user manual and check if firmware
upgrades are available.
Step 1: Check what’s in the box
900XL Stereo Power Amplifier
4 Rubber feet
1 Bracket set
Power adapter (12V DC)
1 Quick start guide
Step 2: Get to know your 900XL
#
Feature
Function
1
12V DC Connector
+12V DC for powering the unit
2
RS-232 Tx Rx G Terminal Block Connector
Connect to PC
3
L+ L– R+ R– OUT Terminal Block Connector
Speaker output
4
IN 2 RIGHT RCA Connector
Connect to stereo audio right input of source 2
5
IN 2 LEFT RCA Connector
Connect to stereo audio left input of source 2
6
IN 1 3.5mm Mini-jack Connector
Connect to stereo audio input of source 1
7
INPUT 1 Button
Selects the input from audio source 1
8
INPUT 2 Button
Selects the input from audio source 2
9
VOLUME – Button
Decreases output volume
10
VOLUME + Button
Increases output volume
11
OVER LED
Illuminates red when device is overheating and mutes output
12
ON LED
Illuminates green when receiving power
Step 3: Mount 900XL
Install 900XL using one of the following methods:
• Attach the rubber feet and place the unit on a flat surface.
• Fasten a bracket (included) on each side of the unit and attach it to a flat surface
(see www.kramerav.com/downloads/900XL).
• Mount the unit in a rack using the recommended rack adapter
(see www.kramerav.com/product/900XL).
• Ensure that the environment (e.g., maximum ambient temperature &
air flow) is compatible for the device.
• Avoid uneven mechanical loading.
• Appropriate consideration of equipment nameplate ratings should be
used for avoiding overloading of the circuits.
• Reliable earthing of rack-mounted equipment should be maintained.

Kramer 900XL Specifications

General

Brand	Kramer
Model	900XL
Category	Amplifier
Language	English