Kramer VM-80A Quick Start Guide

VM-1610 Quick Start
P/N:
2900- 30126 8 QS
Rev:
2
Scan for full manual
VM-1610 Quick Start Guide
This guide helps you install and use your VM-1610 for the first time.
Go to www.kramerav.com/downloads/VM-1610 to download the latest user manual and check if firmware
upgrades are available.
Step 1: Check what’s in the box
VM-1610 Balanced Audio-Stereo Distributor
4 Rubber feet
1 Power cord
1 Quick start guide
Step 2: Get to know your VM-1610
#
Feature
Function
1
POWER Switch
Illuminated power switch to turn the unit on and off.
2
CH 2 LEVEL (LEFT, RIGHT) Trimmers
Turn to adjust the left and right audio gains of channel 2.
3
MODE (1:10, 2x1:5) Button
Press to select 2x1:5 output, release to select 1:10 output.
4
CH 1 LEVEL (LEFT, RIGHT) Trimmers
Turn to adjust the left and right audio gains of channel 1.
5
CHANNEL 1 OUT Terminal Blocks
Connect to the channel 1 balanced stereo acceptors (1 to 5).
6
CHANNEL 1 INPUT Terminal Block
Connect to balanced stereo source 1.
7
CHANNEL 2 INPUT Terminal Block
Connect to balanced stereo source 2.
8
CHANNEL 2 OUT Terminal Blocks
Connect to the channel 1 balanced stereo acceptors (6 to 10) or connect to the
channel 2 balanced stereo acceptors (1 to 5).
9
Power Connector with Fuse
AC connector enabling power supply to the unit.
Step 3: Mount VM-1610
To rack mount the machine, attach both rack ears
(by removing the screws from each side of the
machine and replacing those screws through the
rack ears) or place the machine on a table.
• Ensure that the environment (e.g., maximum ambient temperature &
air flow) is compatible for the device.
• Avoid uneven mechanical loading.
• Appropriate consideration of equipment nameplate ratings should be
used for avoiding overloading of the circuits.
• Reliable earthing of rack-mounted equipment should be maintained.

Kramer VM-80A Specifications

General

Brand	Kramer
Model	VM-80A
Category	Media Converter
Language	English