KRUPS SERIE EA9000
20
INSTALLING THE CLEANING LIQUID
Press “Now” to confirm or “Later” to do it later.
Open the left door (15). Pull the container (19) and screw the bottle (18) onto
the container.
Replace the container back with the bottle and close the door.
Do not screw in the bottle fully.
The bottle must be positioned in line with the drawer.
AUTOMATIC STEAM NOZZLE CLEANING PROGRAMME
Your machine will prompt you to start this programme.
To do so, press “Now“. The cycle will last about 5 minutes and the screen will
display the progress of the cleaning.
PREHEATING, AUTOMATIC MAINTENANCE, RINSING
The machine will start by preheating the circuits, then will carry out an
automatic test and finally will ask you if the appliance needs to be rinsed or
not.
Place a container under the coffee nozzles and press YES if this is required.
The rinsing procedure starts and stops automatically, after around 40 ml have
passed through.
The main drink selection menu is then displayed on the screen.
Important: Ensure that all of the lids, covers and doors are closed and that all parts of the machine are
fitted correctly before starting to prepare a drink.
!
Note: If the first use cycle is interrupted before it has fully completed, you will be asked to save certain
parameters again or to confirm certain settings.
!
To Next Page
Loading...
Need help?
General
