KTM 1290 Super Duke R 2017 User Manual

21 STORAGE 207
21.1 Storage
Info
If you plan to garage the motorcycle for a longer period, perform the following steps or have them performed.
Before storing the motorcycle, check all parts for function and wear. If service, repairs or replacements are necessary, you should
do this during the storage period (less workshop overload). In this way, you can avoid long workshop waiting times at the start of the
new season.
401058-01
– When refueling for the last time before taking the motorcycle out of service, add fuel
additive.
Fuel additive ( p. 232)
– Refuel. ( p. 106)
– Clean the motorcycle. ( p. 203)
– Change the engine oil and oil filter and clean the oil screens. ( p. 196)
– Check the coolant fill level and antifreeze.
– Check the tire air pressure. ( p. 165)
– Remove the battery. ( p. 168)
Guideline
Storage temperature of battery without
direct sunshine
0… 35 °C (32… 95 °F)
– Recharge the battery. ( p. 173)
– Store the vehicle in a dry location that is not subject to large fluctuations in tempera-
ture.
Info
KTM recommends jacking up the motorcycle.
– Lift the motorcycle with the rear lifting gear. ( p. 123)

KTM 1290 Super Duke R 2017 Specifications

General

Displacement	1301 cc
Bore x Stroke	108 mm x 71 mm
Fuel System	Keihin EFI, 56 mm throttle bodies
Transmission	6-speed
Rear Suspension	WP monoshock
ABS	Bosch 9ME Combined ABS
Front Tire	120/70 ZR 17
Rear Tire	190/55 ZR 17
Seat Height	835 mm
Dry Weight	195 kg
Power	177 hp
Torque	141 Nm
Frame	Chromium-Molybdenum steel trellis frame
Front Suspension	WP Ø 48 mm
Front Brake	Dual 320 mm discs, Brembo 4-piston calipers
Rear Brake	Brembo two-piston caliper, 240 mm disc
Wheelbase	1482 mm
Fuel Tank Capacity	18 liters