KTM 1290 SUPER DUKE R 2021 User Manual

15 WHEELS, TIRES
126
Guideline
Screw, front
brake caliper
M10 45 Nm (33.2 lbf ft)
Loctite
®
243™
– Remove the locking piece of the hand brake lever.
– Take the motorcycle off the front lifting gear. ( p. 100)
– Remove the rear of the motorcycle from the lifting gear.
( p. 99)
S04802-11
–
Operate the front brake and compress the fork a few times
firmly.
The fork legs straighten.
–
Tighten screws
6
.
Guideline
Screw, axle clamp M8 15 Nm
(11.1 lbf ft)
15.3 Removing the rear wheel
Preparatory work
– Lift the motorcycle with the rear lifting gear. ( p. 99)
– Remove main silencer. ( p. 106)
S03931-10
Main work
(SUPER DUKE R)
–
Remove inside locking wire
1
.
–
Remove outside locking wire
2
.
S03932-10
– Have an assistant operate the rear brake.
–
Loosen nut
3
and remove it with washer
4
.
– Take off the rear wheel.
S04805-10
(SUPER DUKE RR)
–
Remove inside locking wire
1
.
–
Remove outside locking wire
2
.

KTM 1290 SUPER DUKE R 2021 Specifications

General

Displacement	1301 cc
Transmission	6-speed
Rear Suspension	WP APEX monoshock, fully adjustable
Seat Height	835 mm
Fuel Tank Capacity	16 liters
Dry Weight	189 kg
Bore x Stroke	108 mm x 71 mm
Compression Ratio	13.5:1
Fuel System	Electronic fuel injection
Lubrication	Forced oil lubrication with 3 oil pumps
Wheelbase	1482 mm
Traction Control	MTC (Motorcycle Traction Control), lean-angle sensitive
Engine Type	V-Twin, 4-stroke
Power	180 hp
Torque	140 Nm @ 8000 rpm
Frame	Chromium-Molybdenum steel frame, powder coated
Front Suspension	WP APEX 48
Front Brake	320 mm discs
Rear Brake	Brembo two-piston caliper, 240 mm disc
Clutch	PASC slipper clutch, hydraulically actuated
ABS	Bosch 9.1 MP (incl. Cornering ABS and Supermoto mode)