KTM 250 EXC TPI 2019 User Manual

16 COOLING SYSTEM
132
400243-10
–
Pour coolant in up to measurement
A
above the radiator fins.
Guideline
10 mm (0.39 in)
Coolant 1.2 l (1.3 qt.) Coolant ( p. 162)
E00904-10
–
Push protection cap
2
upward over the thermostat.
E00905-10
–
Unplug connector
3
.
–
Remove thermostat
4
with O-ring and wait until the coolant
escapes without bubbles.
–
Mount thermostat
4
with the O-ring and tighten.
Guideline
Screw, cylinder head
temperature sensor
M10x1.25 12 Nm (8.9 lbf ft)
–
Plug in connector
3
.
–
Position the protection cap
2
.
400243-10
–
Pour coolant in up to measurement
A
above the radiator fins.
Guideline
10 mm (0.39 in)
Coolant ( p. 162)
E00906-10
–
Mount radiator cap
5
.
Danger
Danger of poisoning Exhaust gases are toxic and inhal-
ing them may result in unconsciousness and death.
– Always make sure there is sufficient ventilation
when running the engine.
– Use an effective exhaust extraction system when
starting or running the engine in an enclosed
space.
– Allow the engine to warm up and cool down again.

KTM 250 EXC TPI 2019 Specifications

General

Brand	KTM
Model	250 EXC TPI 2019
Category	Motorcycle
Language	English