What to do if malfunction indicator lamp lights up on KTM Motorcycle?
If the malfunction indicator lamp lights up or flashes on your KTM Motorcycle, it could be due to an error in the electronic fuel injection. You should check the wiring for any signs of damage and inspect the electrical plug-in connections for corrosion and damage. Also, read out the fault memory using the KTM diagnostics tool.
Why KTM 250 SX-F 2020 has high oil consumption?
High oil consumption in your KTM Motorcycle can stem from several causes: * A bent engine vent hose: Ensure the vent hose is routed without bends, or replace it if necessary. * Engine oil level too high: Check the engine oil level. * Engine oil too thin: Change the engine oil and oil filter, and clean the oil screen. * Worn piston or cylinder: Measure the piston/cylinder mounting clearance.
How to troubleshoot 12-V battery discharge on KTM 250 SX-F 2020?
If the 12-V battery is discharged on your KTM Motorcycle, it may be due to: * The battery is not charging: Check the charging voltage and the stator winding of the alternator. * An unwanted power consumer: Check the open-circuit current.
General| Brand | KTM |
|---|---|
| Model | 250 SX-F 2020 |
| Category | Motorcycle |
| Language | English |
Defines the intended purpose of the vehicle for racing and offroad competition.
Warns against using the vehicle outside its intended purpose and with incorrect fluids.
Explains the meaning of risk categories and their associated symbols.
Covers safety regarding rider fitness and poisoning from exhaust gases.
Stresses the importance of wearing appropriate protective clothing for riding.
Covers rider safety, protective clothing, tire patterns, riding style, passenger policy, brake use, weight limits, and pre-sales checks.
Details guidelines for running in the engine during the initial operating hours.
Advises on preparing the vehicle for specific conditions like sand, mud, high/low temperatures.
Lists essential checks before every trip to ensure safe operation and vehicle condition.
Details the procedure for starting the motorcycle, including safety warnings for exhaust gases.
Provides instructions on shifting gears, riding, fuel consumption, and stopping the engine.
Offers advice on brake application, avoiding spongy points, and handling wet/slippery surfaces.
Gives detailed instructions and safety warnings for refueling the motorcycle.
Lists specific maintenance tasks to be performed at various operating hour intervals.
Explains how to adjust the basic chassis setting based on the rider's weight.
Provides instructions for adjusting the low-speed compression damping of the shock absorber.
Details how to adjust the high-speed compression damping of the shock absorber.
Guides on adjusting the rebound damping of the shock absorber for different settings.
Explains how to check the static sag of the shock absorber and its specifications.
Details how to check the riding sag and what to do if it differs from specifications.
Provides instructions and preparatory work for adjusting the shock absorber spring preload.
Guides on adjusting the riding sag, including choosing and mounting a suitable spring.
Details how to adjust the fork air pressure and specifies the correct values.
Explains how to adjust the hydraulic compression damping of the fork.
Guides on adjusting the hydraulic rebound damping of the fork.
Describes how to check for play in the steering head bearing and potential damage.
Guides on adjusting the steering head bearing play and tightening related screws.
Explains the steps to remove the shock absorber, including detaching related components.
Guides on carefully positioning and mounting the shock absorber.
Provides instructions for cleaning the air filter and air filter box, including cleaning agents.
Details the process of removing the fuel tank, including safety warnings for fuel.
Provides instructions and safety warnings for installing the fuel tank.
Details how to check chain tension and what to do if it's not within specification.
Guides on adjusting chain tension and aligning the rear wheel.
Explains how to check wear on the chain, sprockets, and chain guide.
Explains how to check and correct the hydraulic clutch fluid level, with warnings.
Provides step-by-step instructions for changing the hydraulic clutch fluid.
Continues the process of changing clutch fluid, including injecting liquid and checking levels.
Explains how to check the free travel of the hand brake lever and its importance.
Details how to check brake discs for wear and recommends replacement of worn discs.
Explains how to check the front brake fluid level and what to do if it's low.
Provides instructions on how to add front brake fluid, with safety warnings.
Guides on checking front brake linings for minimum thickness and damage.
Details the procedure for changing the front brake linings, emphasizing professional servicing.
Explains how to check the free travel of the foot brake lever.
Explains how to check the rear brake fluid level and what to do if it's low.
Provides instructions on how to add rear brake fluid, with safety warnings.
Guides on checking rear brake linings for minimum thickness and damage.
Details the procedure for changing the rear brake linings, emphasizing professional servicing.
Explains how to check tires for damage, wear, and age, and when to replace them.
Details how to check tire pressure when cold and the importance of correct pressure.
Guides on checking spoke tension by sound and ensuring correct spoke nipple torque.
Provides instructions and warnings for charging the 12-V battery.
Details how to check antifreeze protection and the coolant level in the radiator.
Guides on checking the coolant level in the radiator and correcting it if necessary.
Details how to refill the cooling system with coolant and check the level after a test ride.
Guides on checking the engine oil level when the engine is cold or warm.
Details the process for changing engine oil, oil filter, and cleaning the oil screen.
Continues the process of changing engine oil and filter, including filling the filter housing.
Continues troubleshooting common issues like high oil consumption and battery problems.
Provides specific settings for shock absorber damping, spring preload, and sag for SX-F EU.
Lists specific shock absorber settings for damping, spring preload, and sag for SX-F US.
Lists specific shock absorber settings for damping, spring preload, and sag for XC-F US.
To Next Page