Remove page (s) Replace by page (s) Insert page (s) after page
2-13 2-13F
4-8 4-8F
5-7 5-7F
5-16 5-16F
5-23 5-23F
6-6 6-6F
6-8 to 6-9 6-8F to 6-9F
6-15 6-15F
6-19 6-19F
10-1 10-1F
10-3 10-3F
10-5 to 10-7 10-5F to 10-7F
10-9F 10-8
11-2 11-2F to 11-2Fb
11-67 to 11-69 11-67F to 11-77F
12-1Fb 12-1
12-38F to 12-47F 12-37
13-2F to 13-2Fd 13-1
13-63 to 13-64 13-63F to 13-134F
IMPORTANT INFORMATION/UPDATING INSTRUCTIONS
To be able to continue using the existing loose-leaf repair instructions, simply print the
following pages and insert them in the existing repair instructions:
1,3,7,9,28,49,65,74,81,93,95,96,102,106,225,228,230-232,234,237,238,
303-313,316,354-363,366-369,430-501
KTM REPAIR MANUAL IN LOOSE-LEAF FORM
STORING THE REPAIR MANUAL IN THE BINDER
– Put the index into the binder.
– Put the front page of the repair manual (210x297 mm) into the transparent pocket provided for this purpose on the outside of
the binder.
– Put the spine label (170x45 mm) into the transparent pocket provided for this purpose on the spine of the binder.
– Put the summary list of contents (150x297 mm) into the transparent pocket provided for this purpose on the inside of the
binder or insert this page on the beginning of the manual.
– Then insert the individual chapters of the manual between the sheets of the index according to the page number printed in
the right bottom corner of each page.
Example: page no. 3-5; 3 = chapter 3; 5 = page 5
All pages with a page number that begins with the digit 3, for example, must be put under the index heading „Chapter 3“.
– Index sheets that have not been marked with a certain chapter are for your personal convenience. The respective headings can
be entered in the list of contents.
To Next Page
Loading...
Need help?
General
