3 WORK 4
3.1 Raising the motorcycle with a lift stand
Note
Danger of damage The parked vehicle may roll away or fall over.
– Always place the vehicle on a firm and even surface.
401942-01
– Raise the motorcycle at the frame underneath the engine.
Lift stand (78929955100)
The wheels must no longer touch the ground.
– Secure the motorcycle against falling over.
3.2 Removing the motorcycle from the lift stand
Note
Danger of damage The parked vehicle may roll away or fall over.
– Always place the vehicle on a firm and even surface.
402581-10
– Remove the motorcycle from the lift stand.
– Remove the lift stand.
–
To park the motorcycle, insert plug-in stand
into the plug-in stand bracket on
the left side of the vehicle.
Info
Remove the plug-in stand before riding.
3.3 Installing the front wheel
Warning
Danger of accidents Reduced braking efficiency due to oil or grease on the brake discs.
– Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.
601957-11
– Check the wheel bearing for damage and wear.
» If the wheel bearing is broken or worn:
– Change the wheel bearing.
–
Clean and grease wheel spindle
.
Long-life grease ( p. 10)
–
Lift the front wheel into the fork, position it, and insert wheel spindle
.
The brake linings are correctly positioned.
–
Tighten screws
.
Guideline
Screw, fork stub M6 10 Nm (7.4 lbf ft)
To Next Page
Loading...
Need help?
General
