7 COMBINATION INSTRUMENT
42
If the device is not automatically paired with the combina-
tion instrument after approx. 30 seconds:
– Restart the combination instrument or repeat the Pair-
ing procedure.
A suitable headset can be paired with the combination instrument
in the Headset submenu.
7.24.9 Telephony (optional)
F01794-01
Condition
• Function KTM MY RIDE (optional) activated.
• Function Bluetooth
®
(optional) activated.
• The Bluetooth
®
function should also be activated in the device
to be paired.
• The combination instrument is connected to a suitable cell-
phone.
• The combination instrument is connected to a suitable head-
set.
Warning
Danger of accidents Headphone volume which is too
high distracts attention from traffic activity.
– Always select headphone volume which is low
enough for you to still clearly hear acoustic signals.
– Press the SET button to accept an incoming call.
– Press the BACK button to reject an incoming call.
– Press and hold the UP button to increase the audio volume.
– Press and hold the DOWN button to reduce the audio volume.
Info
It is not possible to change the audio volume using the
combination switch with every cellphone.
The call duration and contact are displayed. Depend-
ing on the cellphone settings, the contact is shown by
name.
An incoming call is visualized in a small window at the
top of the combination instrument display when the
navigation function is active.
You cannot navigate in the menu during an active
phone conversation.
7.24.10 Trips/Data
F01795-01
– Press the SET button when the menu is closed.
– Press the UP or DOWN button until Trips/Data is marked. Press
the SET button to open the menu.
General information can be accessed in the menu Trips/Data.
To Next Page
Loading...
Need help?
General
