18 COOLING SYSTEM
124
18.5 Refilling with coolant
Warning
Danger of poisoning Coolant is toxic and a health hazard.
– Keep coolant out of the reach of children.
– Do not allow coolant to come into contact with the skin, the eyes and clothing.
– Consult a doctor immediately if coolant is swallowed.
– Rinse the affected area immediately with plenty of water in the event of contact with the skin.
– Rinse eyes thoroughly with water and consult a doctor immediately if coolant gets into the eyes.
– Change clothing if coolant spills onto your clothing.
Condition
The motor is cold.
Preparatory work
– Deactivate the vehicle. ( p. 43)
– Fold the seat up. ( p. 69)
– Remove the Powerpack HV. ( p. 108)
– Mount the protection cap. ( p. 71)
C00744-11
Main work
–
Ensure that the screws
1
and
2
are tightened.
Info
The screws are located under the electric motor and
can be accessed through a recess in the motor guard.
– Position the motorcycle upright.
–
Pour coolant in up to measurement
A
above the radiator fins.
Guideline
10 mm (0.39 in)
Coolant 0.7 l (0.7 qt.) Coolant ( p. 143)
– Mount the radiator cap.
Finishing work
– Remove the protection cap. ( p. 71)
– Install the Powerpack HV. ( p. 109)
– Lock the seat. ( p. 69)
– Go for a short test ride.
– Check the cooling system for leaks.
– Check the coolant level. ( p. 122)
To Next Page
Loading...
Need help?
General
