27SPECIFICATIONS
ENGLISH
A Specifications are subject to change without notice.
Model V1305-E3 V1505-E3 V1505-TE3
Type
Vertical, water-cooled, 4-cycle diesel engine
Number of cylinders
4
Bore and stroke mm (in.)
76 × 73.6
(2.99 × 2.90)
78 × 78.4 (3.07 × 3.09)
Total displacement cm (cu.in.) 1335 (81.47) 1498 (91.41)
Combustion chamber
Spherical Type (E-TVCS)
SAE NET Intermittent kW / rpm
H.P. (SAEJ1349) (HP / rpm)
23.0/3600
(30.8/3600)
25.0/3000
(33.5/3000)
27.5/3600
(36.9/3600)
31.3/3000
(42.0/3000)
SAE NET Continuous kW / rpm
H.P. (SAEJ1349) (HP / rpm)
20.0/3600
(26.8/3600)
21.7/3000
(29.1/3000)
23.9/3600
(32.0/3600)
27.2/3000
(36.5/3000)
Maximum bare speed rpm 3800 3200 3800 3200
Minimum bare idling speed rpm
850 ~ 950
1000 ~ 1100
Order of firing
1-3-4-2
Direction of rotation
Counter-clockwise (viewed from flywheel side)
Injection pump
Bosch MD Type Mini Pump
Injection pressure
13.73 Mpa (140 kgf/cm , 1991 psi)
Injection timing (Before T.D.C.) 21° 18° 21° 18°
Compression ratio
24 : 1
23 : 1
Fuel
Diesel Fuel No.2-D (ASTM D975)
Lubricant
(API classification)
above CF grade
Dimension mm (in.)
(length × width × height)
583.8 × 396.0 ×
607.0
(22.98 × 15.59 ×
23.90)
591.3 × 396.0 × 607.0
(23.28 × 15.59 × 23.90)
591.3 × 433.0 ×
621.0
(23.28 × 17.05 ×
24.45)
Dry weight
(BB Spec.) kg (lbs.)
110
(242.5)
114
(251.3)
Starting system
Cell starter (with glow plug)
Starting motor
12 V, 1.2 kW
Charging generator
12 V, 360 W
Recommended battery capacity
12 V, 70 AH, equivalent
To Next Page
Loading...
Need help?
General
