TO THE READER
This Workshop Manual tells the servicing personnel about the mechanism, servicing and
maintenance of the M100GX, M110GX, M126GX, M128GX, M128GX-FS, M135GX and M135GX-FS. It
contains 4 parts: "Information", "General", "Mechanism" and "Servicing".
Information
This section primarily contains information below.
• Safety First
• Safety Decal
• Specification
• Dimension
General
This section primarily contains information below.
• Engine Identification
• Model Identification
• General Precautions
• Maintenance Check List
• Check and Maintenance
• Special Tools
Mechanism
This section contains information on the structure and the function of the unit. Before you continue
with the subsequent sections, make sure that you read this section.
Refer to the latest version of Workshop Manual (Code No. 9Y021-01870 / 9Y021-18200) for the
diesel engine / tractor mechanism that this workshop manual does not include.
Servicing
This section primarily contains information below.
• Troubleshooting
• Servicing Specifications
• Tightening Torques
• Checking, Disassembling and Servicing
Regarding the servicing of Common Rail System (CRS), refer to "DIAGNOSIS MANUAL"
(9Y120-01920, 9Y120-01860).
Regarding the servicing of Diesel Particulate Filter (DPF), refer to "DIESEL PARTICULATE FILTER
HANDLING MANUAL" (9Y121-08130).
All illustrations, photographs and specifications contained in this manual are of the newest
information available at the time of publication.
KUBOTA reserves the right to change all information at any time without notice.
Since this manual includes many models, information or illustrations and photographs can show
more than one model.
August, 2012
© KUBOTA Corporation 2012
To Next Page
Loading...
Need help?
General
