SAFETY PRECAUTIONS - continued
OM 0297SB-AU
9
STORAGE
Before storing the subframe or snowblower,
certain precautions should be taken to
protect it from deterioration.
1. Clean the subframe and snowblower
thoroughly.
2. Make all the necessary repairs.
3. Replace all safety signs that are damaged,
lost, or otherwise become illegible. If a part
to be replaced has a sign on it, obtain a
new safety sign from your dealer and install
it in the same place as on the removed part.
4. Repaint all parts from which paint has worn
or peeled.
5. Lubricate the subframe and snowblower as
instructed under "Lubrication" section.
6. When the subframe and snowblower are
dry, oil all moving parts. Apply oil liberally
to all surfaces to protect against rust.
7. Store in a dry place.
8. If snowblower has hydraulic components,
install protective plugs and caps on the
quick couplers.
To Next Page
Loading...
Need help?
General
