KYMCO DINK 200i Service Manual

8. DRIVE AND DRIVEN PULLEYS/
KICK STARTER
8-9
DINK 200i/125
Remove the movable drive face assembly.
Drive belt inspection
Check the drive belt for cracks, separation or
abnormal or excessive wear.
Measure the drive belt width.
Service Limit:
DINK 200i: 17.5 mm (0.7 in)
DINK 125: 17.3 mm (0.692 in)
Clutch out inspection
Inspect the clutch outer for wear or damage.
Measure the clutch outer I.D.
Service Limit: 130.5 mm (5.22 in)
Movable Drive Face Assembl
y
Use specified genuine parts fo
r
replacement.
Ϡ

KYMCO DINK 200i Specifications

General

Displacement	175.1 cc
Cooling System	Liquid cooled
Transmission	CVT
Front Suspension	Telescopic fork
Front Brake	Disc
Rear Brake	Disc
Seat Height	780 mm
Dry Weight	148 kg
Front Tire	120/70-12
Rear Tire	130/70-12
Starter	Electric
Length	2050 mm
Engine Type	Single cylinder, 4-stroke
Fuel System	Electronic Fuel Injection