KYMCO MXU700i User Manual

4-14
c. Operator Presence Control (OPC)*
*T3b MODELS ONLY
After 10 seconds, the operator presence control (OPC)
activates an alarm signal and "OPC" appears on the gauge
display when the any of following conditions is fulfilled:
 Ignition is switched on or the engine is running below the
1800 rpm.
 Thumb throttle is not actuated.
 No service brake is actuated.
 Rear parking brake is not operated (See the CH 4.10.2 for
operation of rear parking brake)

KYMCO MXU700i Specifications

General

Brand	KYMCO
Model	MXU700i
Category	Offroad Vehicle
Language	English