6-5
6.3.2. Neutral to reverse and reverse to park
1. Bring the machine to a complete stop and return the
throttle lever to the closed position.
2. Apply the brake pedal.
3. Shift from neutral to reverse or from reverse to park and
vice versa by moving the drive select lever along the shift
guide.
NOTE
When in reverse, the reverse indicator light should be on. If the light
does not come on, ask a KYMCO dealer to inspect the machine.
4. Check behind for people or obstacles, and then release
the rear brake pedal.
5. Open the throttle lever gradually and continue to watch to
the rear while backing.
POTENTIAL HAZARD
Improperly operation in reverse.
WHAT CAN HAPPEN
You could hit an obstacle or person behind you, resulting in
serious injury.
HOW TO AVOID THE HAZARD
When you shift into reverse, make sure there are no obstacles
or people behind you. When it is safe to proceed, go slowly.
To Next Page
Loading...
Need help?
General
