9-10
Optional Equipment > Using a Connected Telephone
Remote Switch Function
You can start fax reception by operation from the connected telephone set. This function is convenient for using this
machine and a telephone set (commercially available product) in combination installed at places distant from each other.
Using the Remote Switch Dial
To start fax reception by operation from the connected telephone set, use the following operation.
1
The connected telephone set makes a ringing tone.
Lift the handset of the telephone.
2
Press the remote switch dial number (2 digits).
When you hear the fax tone from the handset, enter the two-digit remote switch dial number using the dial button
on the telephone set. The telephone line switches to the machine, and reception starts.
In order to use remote switch, it is necessary to connect the tone signal-sending telephone set (commercially
available product) to the machine. However, even if it is a tone signal-sending telephone set, this function may
not be used satisfactorily depending on the type of telephone set. For details, contact our agent or the store
where you purchased this machine.
The remote switch dial (2 digits) is set to 55 at the factory.
The remote switch dial number can be changed.
Remote SW Dial (8-11)
You can change the number of times the ringing tone rings.
[FAX] (8-8)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
