Kyocera KM-1650 Advanced Operation Guide

Job Accounting
4-12 ADVANCED OPERATION GUIDE
Default Settings
Use to adjust the default settings for Job Accounting.
Copy Job Accounting
You can select whether or not to enable Job Accounting for the Copy
functions.
1
Display the Job Accounting screen, refer to Access the Job Accounting
Screen, on page 4-3.
2
Press S or T to select Job
Accountg Def. Set and press
[Enter].
3
Press S or T to select Copy Job
Account and press [Enter].
4
Press S or T to select Off or On
and press [Enter].
5
On completion, press S or T to
select End and press [Enter].
Printer Job Accounting
You can select whether or not to enable Job Accounting for the Printer
functions.
1
Display the Job Accounting screen, refer to Access the Job Accounting
Screen, on page 4-3.
2
Press S or T to select Job
Accountg Def. Set and press
[Enter].
3
Press S or T to select Prnt Job
Account and press [Enter].
Job Accountg Def. Set.
Job Accounting:
Each Job Accounting TL
Edit Job Accounting
[]On
Prnt Job Account.
Job Accounting Default Setting:
End
Copy Job Account.: On
:
On
Copy Job Accounting:
Off
On
*
Prnt Job Account.
Job Accounting Default Setting:
End
Copy Job Account.: On
:On
Job Accountg Def. Set.
Job Accounting:
Each Job Accounting TL
Edit Job Accounting
[]On
Prnt Job Account.
Job Accounting Default Setting:
End
Copy Job Account.: On
:On

Kyocera KM-1650 Specifications

General

Print Technology	Laser
Print Speed	16 ppm
Max Resolution	600 x 600 dpi
Paper Capacity	300 sheets
Memory	32 MB
Functions	Print, Copy, Scan
Type	Monochrome
Grayscale Half-Tones	256 levels
Max Document Enlargement	200%
Max Document Reduction	50%
Output Trays Capacity	250 sheets
Monthly Duty Cycle	15, 000 pages
Scan Type	Flatbed
First Copy Out Time B/W	5.9 seconds
Supported Media Type	Plain paper
Max Media Capacity	1, 300 sheets
Interface	USB 2.0
Original Size	A3 (11.7 in x 16.5 in) (max)