Kyocera KM-1650 Advanced Operation Guide

Job Accounting
ADVANCED OPERATION GUIDE 4-15
Using Job Accounting
Copy Operation
To perform copying operations when Job Accounting is enabled, enter
your ID-code using the numeric keys.
1
Enter the ID-code using the
numeric keys and press [Enter].
The Copier Basic screen displays.
NOTE: If you enter an incorrect code, press [Stop/Clear] and enter the
code again.
If the entered ID-code does not match any registered ID-code, an error
sound is emitted. Enter the correct ID-code and press [Enter].
2
Perform the copy operation.
3
When copying is complete, press
the Job Accounting key.
Printer Operation
To use Job Accounting for printing, options must be selected in the printer
driver. For details, refer to the KX Printer Driver Operation Guide.
Enter Account ID.
: Confirm
********

Kyocera KM-1650 Specifications

General

Print Technology	Laser
Print Speed	16 ppm
Max Resolution	600 x 600 dpi
Paper Capacity	300 sheets
Memory	32 MB
Functions	Print, Copy, Scan
Type	Monochrome
Grayscale Half-Tones	256 levels
Max Document Enlargement	200%
Max Document Reduction	50%
Output Trays Capacity	250 sheets
Monthly Duty Cycle	15, 000 pages
Scan Type	Flatbed
First Copy Out Time B/W	5.9 seconds
Supported Media Type	Plain paper
Max Media Capacity	1, 300 sheets
Interface	USB 2.0
Original Size	A3 (11.7 in x 16.5 in) (max)