A Cassette 1
➊
Pull up left cover 1 lever and open left
cover 1.
KM-3050/4050/5050
B Cassette 2
➊
Open left cover 2.
C Optional Cassettes 3 and 4
➊
Open left cover 3.
Location
Indicator
Paper Jam
Location
A Cassette 1
B Cassette 2
C Cassette 3 or 4 (Option)
D MP Tray
E Inside the left cover 1, 2 or 3
F Duplex unit
G Document Processor (Option)
Clearing Paper Jams
If a paper jam occurs, the touch panel will display Paper misfeed
and the machine will stop. Refer to these procedures to remove
the jammed paper.
Jam Location Indicators
If a paper jam occurs, the location of the jam will be displayed by
the alphabet, which corresponds to the specific component in the
machine as the following figure with clearing instructions.
➋
Remove the jammed paper.
➌
Pull out cassette 1.
➍
Remove the jammed paper. If the paper
tears, remove every loose scrap from
inside the machine.
➎
Push cassette 1 back in place securely.
➏
Press the specified position to close left
cover 1.
➋
Remove the jammed paper.
➌
Pull out cassette 2.
➍
Remove the jammed paper.
If the paper tears, remove every loose
scrap from inside the machine.
➎
Push cassette 2 back in place securely.
➏
Close left cover 2.
➋
Remove the jammed paper.
If the paper tears, remove every loose
scrap from inside the machine.
➌
Pull out the cassette in use.
➍
Remove the jammed paper.
➎
Push the cassette back in place securely.
➏
Close left cover 3.
D MP Tray
➊
Remove all papers from the MP Tray.
E Inside the Left
Covers 1, 2 and 3
➊
Open the left cover where the paper is
jammed inside.
➋
If a paper is jammed inside, lift the lever
to remove the paper.
➋
Remove the jammed paper.
If the paper tears, remove every loose
scrap from inside the machine.
➌
Close the left cover.
F Duplex Unit
➊
Pull up left cover 1 lever and open the
left cover.
➋
Remove the jammed paper.
➌
Lift the duplex unit and remove the
jammed paper.
➍
Press the specified position to close left
cover 1.
Precautions of the Paper Jam
•
Do not reuse jammed papers.
•
If the paper tears during removal, be sure to remove any loose scraps
of paper from the machine inside. Scraps of paper left in the machi
-
ne could cause subsequent jamming.
•
Discard the paper that jammed in the optional document finisher
or 3,000-sheet capacity document finisher. The page which jam has
occurred will be printed again.
•
CAUTION Never use sharp tools like knifes, screwdrivers or cutters to
clear paperjams. Be aware of rings or watches as well.
•
CAUTION Do no store paperclips or staples on any device.
•
CAUTION High voltage is present in the charger section. Take suffi-
cient care when working in this area, as there is a danger of electrical
hock.
•
CAUTION The fixing unit of this product is extremely hot. Take
sufficient care when working in this area, as there is a danger
of getting burned.
To Next Page
Need help?
Power
System Memory
Weight and Dimensions
