Create a new KPrint port
KPrint Installation 1-1
KPrint Installation
KPrint installs a client port monitor that enables Windows TCP/IP printing to any
network card connected to a printing system. KPrint supports Raw mode, LPR, IPP,
Email, and Network FAX printing.
KPrint Setup
It is strongly recommended that you exit all Windows programs before running this
setup program.
1
In Windows, click Start > Run. Type the file path: 1
<CD drive letter>:\Network\KPrint\KPInst.exe
Click OK.
2
In the Welcome to KPrint Setup page, click Next to continue with the Setup
program, or click Cancel to quit setup. 2
3
The KPrint Setup page displays a default Destination Folder. Click Next to accept
the folder and continue the setup, or Browse to select another location for the KPrint
utility files. 3
4
The next KPrint Setup page displays a default Program Folder name where the
setup program will add program icons. (You can type a new folder name, or one from
the Existing Folders list.) Click Next. 4
5
The last KPrint Setup page displays a KPrint is successfully installed message. You
can: 5
•Select Yes to add a new KPrint port using the KPrint Add Port Wizard. Click
Finish. (The selections for adding a new port appear in step 6 on page 1-2.)
•Select No to close the KPrint Setup Wizard without adding a new port. Click
Finish.
Create a new KPrint port
More commonly, KPrint ports will be created using the Add Printer Wizard.
1
Click Start in the Windows taskbar, and click Printers and Faxes to open the
Printers and Faxes window. 1
2
Click Add a printer in the Printer Tasks group box on the left. 2
Note: The Add Printer Wizard can also be launched by clicking Add printer in the
File menu of the Printers and Faxes window.
3
The Add Printer Wizard page appears. In the Welcome page, click Next and follow
the instructions. 3
4
Select Local printer attached to this computer. Click Next. 4
5
Select Create a new port, scroll down to KPrint Port. Click Next. 5
To Next Page
Need help?
General
