Installation requirements
BLUEPOD TECHNICAL SERVICE Tel: 1800 800 255 Email: technical@bluepod.com.au
Copyright Bluepod Coffee Co Pty Ltd Page 1 of 1
NFOR
Plumbing
There are 2 plumbing configurations, mains fill and tanked supply:
1: Mains fill
The mains option requires a cold drinking water supply within 2m. This should be from an accessible, non
return, water shut off tap fitted with a 1/2” BSP male fitting. 2m of John Guest water line is supplied which is
cut as needed for the supply to the machine.
2: Tank fill
The tank option needs only electrical power. Be aware if a base cabinet is required, the water tank will need
locating externally if a changegiver is fitted. For a base unit with a coin acceptor, the tank is fitted inside the
base cabinet.
Electrical
The only electrical requirement is for a 10A switched socket to be within 2m of the machine location
To Next Page
Need help?
General
