29
Leica IP C
Instrument Setup 4
• Carry out the following installation steps:
1. Install the accessories.
2. Insert the shielding glass.
3. Insert the flash bulb.
4. Connect to the power supply.
5. Exchange the cartridges.
6. Establish data connection to PC.
7. Install printer driver.
8. Fill with cassettes.
9. Run a test print.
4.3 Standard delivery
The Leica IP C standard equipment consists of the following items:
1 Leica IP C, basic instrument without unload station 14 0602 33206
1 Transport cartridge (in the instrument) 14 0601 42865
1 UV ink cartridge Leica 14 0601 42350
1 Unload station (manual), complete 14 0602 35998
1 Accessory kit consisting of: 14 0602 38351
1 Flash bulb 14 0601 37152
6 Sets of cassette magazines (2 packs with 3 sets each) 14 0602 36688
1 Printer cable, serial 14 0601 37044
1 Tool set consisting of:
1 Slotted screwdriver 4 x 100 14 0170 38504
1 Allen key size 2.5 14 0222 04137
1 "Leica" brush 14 0183 30751
1 Set of replacement fuses consisting of 2 fuses 3.15 A T (5 x 20 mm) 14 6943 03150
1 Ink cartridge lock (in the instrument) 14 0601 39615
2 Shielding glasses 14 0601 42533
1 Transport plates 14 0601 44236
1 Instructions for Use, (German/English) printed, Language CD
14 0602 80200 and Installation Instructions 14 0602 82101, (German/
English) printed
14 0602 80001
The country specific power cord needs to be ordered separately. Please find a list of all power cords
available for your device on our website www.LeicaBiosystems.com within the product section.
Optional accessories
1 Automated unload station for Leica IP C 14 0602 33226
1 Set of cassette trays (pack of 10) 14 0602 33253
1 Magazine holder C for 6 magazines 14 0602 36946
To Next Page
Loading...
Need help?
General
