Page 2
UNIT SUPPORT
FEET
8−1/2
(216)
8−3/4
(222)
5−1/2
(140)
9−1/2
(241)
8−1/4
(210)
13−1/2
(343)
ELECTRICAL
INLETS
SIDE VIEW
DISCHARGE AIR
SUCTION LINE
CONNECTION
LIQUID LINE
CONNECTION
B (width)C (depth)
4−1/4(108)
4−3/4
(121)
1 (25)
2 (51)
END VIEW
UNIT SUPPORT
FEET
D
A
(height)
024 TO 036 BASE SECTION
(Small Base)
048 AND 060 BASE SECTION
(Medium and Large Base)
E
F
GHI
J
K
Model
A
(Height)
B
(Width)
C
(Depth)
DEFG HI
in. mm in. mm in. mm in. mm in. mm in. mm in. mm in.mmin. mm in.mm in. mm
-024 35 889 27 686 28 7118203 - - -- - -- - -- - -- - -- - -- - -- - -- - -- - -- - -- - -- - -- - -
-036 35 889 27 686 28 7118203 - - -- - -- - -- - -- - -- - -- - -- - -- - -- - -- - -- - -- - -- - -
-048 45 1143 30-1/2 775 35 889 11-5/8 295 13-7/8 352 7-3/4 197 3-1/483 27-1/8 689 3-5/8924-1/2 11420-5/8524
-060 45 1143 30-1/2 775 35 889 11-5/8 295 13-7/8 352 7-3/4 197 3-1/483 27-1/8 689 3-5/8924-1/2 11420-5/8524
SETTING THE UNIT (Continued) –
Unit Placement
NOTICE!
Roof Damage!
This system contains both refrigerant and oil. Some
rubber roong material may absorb oil, causing the
rubber to degrade. Failure to follow this notice could
result in damage to roof surface.
UNIT DIMENSIONS – INCHES (MM)
IMPORTANT
This unit must be matched with an indoor coil as
specied with AHRI. For AHRI Certied system match-
ups and expanded ratings, visit www.LennoxPros.com
Coils previously charged with HCFC-22 must be ushed.