- 19 -
8.5. Reconnecting iComfort Mobile Setup Application to System at a Later Time
Trouble connecting the iComfort Mobile Setup Application to the Smart Hub for follow up servicing. Your mobile de
vice's Wi-Fi does see the Smart Hub's SSID and connects to it, but the iComfort Mobile Setup Application does not
detect the Smart Hub.
Short Term Fix: Turn off Wi-Fi in the thermostat. Once the thermostat Wi-Fi is disabled, the iComfort Mobile Setup
Application will be able to detect the Smart Hub and connect to it. Go to thermostat home screen and touch the menu
icon. Touch settings and then wi-fi to access the Wi-Fi setting screen. Toggle the option to OFF.
NOTE - Remember to turn on the thermostat Wi-Fi once service has been completed.
Long Term Fix: Issue will be address and corrected in the software release 3.1.
To Next Page
Loading...
Need help?
General
